Need help?Do you have a question about the Casella HB4056-01 dBadge2 and is the answer not in the manual?
General| Data Logging | Yes |
|---|---|
| Type | Personal Noise Dosimeter |
| Wireless Connectivity | Bluetooth |
| Operating Temperature | -10°C to +50°C |
| Battery Life | 35 hours |
| Display | OLED |
| Standards | IEC 61252:2002 |
| Microphone Type | Electret condenser |
| Storage Temperature | -20 °C to +60°C |
| Humidity Range | 0 - 90% RH, non-condensing |
Details on how to attach the dBadge2 to clothing or other equipment.
Explains the function of the windscreen and how to remove/refit it.
Instructions for charging the dBadge2 using the docking station and power supply.
Procedure for powering on the dBadge2 and initial startup screens.
Steps for performing field calibration of the dBadge2 using an acoustic calibrator.
Instructions on how to begin a noise measurement run on the dBadge2.
How to stop an active measurement run on the dBadge2.
Procedure for powering down the dBadge2 device.
Configuring display parameters for Dosimeters D1, D2, and D3.
Details of pre-defined configurations for Dosimeters D1, D2, and D3.
Overview of parameters that can be configured for custom dosimeter setups.
Establishing a secure connection between dBadge2 and mobile devices.
Performing a battery diagnostic check to assess storage performance.
To Next Page
