Operation Guide 2763
9
9. If the stopwatch minute
hand is not aligned with
the 12 o’clock position,
use the
DD
DD
D button to
adjust it.
• Each press of the D button
advances the stopwatch
minute hand by one step.
• Holding down the D button
advances the hand at high
speed.
10
. When all the settings are the way you want, press the
AA
AA
A button.
• This exits the setting screen and automatically synchronizes
the minute hand with the current seconds count.
• At this time, the second hand will adjust automatically to the
digital time.
• The display also will exit the setting screen automatically if
you do not perform any operation for about two or three
minutes.
7. If the 1/20-second hand is
not aligned with the
12 o’clock position, use
the
DD
DD
D button to adjust it.
• Each press of the D button
advances the 1/20-second
hand by one step.
• Holding down the D button
advances the hand at high
speed.
8. Press the
CC
CC
C button to
advance to setting of the
stopwatch minute hand
for adjustment.
4. Press the
CC
CC
C button to
move the flashing
between the hour and
minute settings.
5. Use the
DD
DD
D (+) and
BB
BB
B (–)
buttons to adjust the hour
and minute hands.
• Each press of the D button
moves the hands 20 seconds
clockwise, while the B button
moves them 20 seconds
counterclockwise.
• Holding down either button
moves the hand at high
speed.
• Note that the 24-hour hand
moves in accordance with
movement of the hour and
minute hands. One full
rotation of the 24-hand is 24
hours. When setting the hour
and minute hands, make sure
that you also keep an eye on
the 24-hour hand to make
sure that you set the analog
time so it correctly matches
the am/pm time on the digital
display.
Hour Hand Minute Hand
(Back)
(Forward)
24-hour hand
Stopwatch 1/20-second Hand
(Forward)
12 o’clock
(Forward)
Stopwatch Minute Hand
12 o’clock
High-speed Lock
• While holding down the D button to start high-speed clockwise
movement of the hands, press the B button to lock the
high-speed movement.
• While holding down the B button to start high-speed
counterclockwise movement of the hands, press the D button to
lock the high-speed movement.
• High-speed movement of the hands will continue until it completes
a 12-hour cycle, or until you press any button to stop it.
6. Press the
AA
AA
A button to
select the stopwatch
1/20-second hand for
adjustment.