Casio 3469 User Manual

Operation Guide 3469
E-9
3. When the setting you want to change is flashing, use
D
and
E
to change it as
described below.
Screen: To do this: Do this:
Reset the seconds to Press
D
.
Toggle between Daylight Saving Time ( )
and Standard Time ( )
Press
D
.
Change the hour or minutes Use
D
(+) and
E
(–).
Change the year Use
D
(+) and
E
(–).
Change the month or day
4. Press
A
to exit the setting screen.
• The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
• See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
E-8
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
To set the time and date
1. In the Timekeeping Mode, hold down
A
until the
seconds start to flash, which indicates the setting
screen.
2. Press
C
to move the flashing in the sequence shown
below to select other settings.
Seconds
MinutesDST Hour
YearMonthDay
Seconds
l
l
l
l
l
l
l
l
l
l
l
l
PM indicator
Minutes
Seconds
Month – DayDay of week
Hours
E-7
Dual Time Mode
Countdown Timer Mode
Alarm Mode
Recall Mode
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
▲ ▲
▲ ▲
E-6
General Guide
• Press
C
to change from mode to mode.
• In any mode (except when a setting screen is on the display), press
B
to illuminate
the face of the watch.
Timekeeping Mode
Press
C
.
Stopwatch Mode
▲
▲
E-5
Illumination ……………………………………………………………………………E-41
To illuminate the display manually ……………………………………………E-41
To specify the illumination duration……………………………………………E-42
Reference ………………………………………………………………………………E-43
To turn the button operation tone on and off …………………………………E-44
Specifications …………………………………………………………………………E-47
Operating Precautions ………………………………………………………………E-49
User Maintenance ……………………………………………………………………E-60
E-4
Recall Mode ……………………………………………………………………………E-23
To recall stopwatch time records………………………………………………E-24
To delete a log …………………………………………………………………E-26
Countdown Timer………………………………………………………………………E-27
To use the countdown timer ……………………………………………………E-28
To configure countdown start time and auto-repeat settings ………………E-29
Alarms ……………………………………………………………………………………E-31
To set an alarm time ……………………………………………………………E-33
To test the alarm ………………………………………………………………E-35
To select the operation of Alarm
……………………………………………
E-36
To turn Alarms
and on and off …………………………………………E-37
To turn the hourly time signal on and off ……………………………………E-38
Dual Time ………………………………………………………………………………E-39
To set the Dual Time ……………………………………………………………E-39
E-3
Contents
About This Manual …………………………………………………………………… E-1
General Guide ………………………………………………………………………… E-6
Timekeeping …………………………………………………………………………… E-8
To set the time and date ……………………………………………………… E-8
To toggle between 12-hour and 24-hour timekeeping ………………………E-10
To toggle the Timekeeping Mode between DST and Standard Time ……E-11
Stopwatch ………………………………………………………………………………E-12
To measure elapsed time ………………………………………………………E-16
To measure elapsed time with lap times ……………………………………E-16
To measure elapsed time with split times ……………………………………E-18
To time first and second place finishes ………………………………………E-20
E-2
• To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions under “Operating Precautions”
and “User Maintenance.”
• Be sure to keep all user documentation handy for future reference.
E-1
About This Manual
• Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
• Button operations are indicated using the letters shown
in the illustration.
• Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
MO1809-EA
© 2018 CASIO COMPUTER CO., LTD.

Casio 3469 Specifications

General

Brand	Casio
Model	3469
Category	Watch
Language	English

Summary

About This Manual

General Guide

Timekeeping

Set Time and Date

Instructions for setting the watch's current time and date, including seconds, hour, minutes, year, month, and day.

Toggle Time Format (12/24 Hour)

Switch between 12-hour (AM/PM) and 24-hour time display formats.

Toggle Daylight Saving Time (DST)

Enable or disable Daylight Saving Time (DST) for accurate timekeeping.

Stopwatch Operations

Measure Elapsed Time

Basic procedure to start, stop, and reset the stopwatch for measuring total elapsed time.

Measure Elapsed Time with Lap Times

Record lap times during an elapsed time measurement operation.

Measure Elapsed Time with Split Times

Record split times during an elapsed time measurement operation.

Time First and Second Place Finishes

Record times for both the first and second finishers in a race.

Recall Mode for Stopwatch Data

Recall Stopwatch Time Records

View previously recorded lap and split times stored in memory.

Delete Stopwatch Log Entries

Remove recorded stopwatch logs and their associated data from memory.

Countdown Timer Usage

Start and Pause Countdown Timer

Initiate, pause, and resume countdown operations.

Configure Countdown Timer Settings

Set the countdown duration and enable or disable the auto-repeat function.

Alarms and Hourly Time Signal

Set Alarm Times

Program up to three independent alarms with specific times and dates.

Test Alarm Function

Verify the alarm sound by manually triggering it.

Select Alarm Operation Modes

Choose between alarm on, snooze on, or alarm off for Alarm 1.

Enable/Disable Alarms 2 and 3

Activate or deactivate Alarms 2 and 3.

Toggle Hourly Time Signal

Turn the hourly chime notification on or off.

Dual Time Setting

Set Dual Time

Configure the watch to display time in a second time zone, including DST option.

Watch Illumination

Manual Illumination

Activate the watch backlight manually for low-light visibility.

Specify Illumination Duration

Set the backlight to stay on for 1.5 or 3 seconds.

Reference Information

Button Operation Tone Control

Scrolling Through Data

Watch Specifications

Operating Precautions

Water Resistance Precautions

Guidelines for maintaining water resistance and avoiding damage from water exposure.

Professional Servicing and Battery Replacement

Importance of professional checks for water resistance and battery replacement.

Band Care and Maintenance

Temperature Extremes

Impact and Shock Resistance

Magnetism and Electrostatic Charge

Chemical Exposure Effects

Storage Guidelines

Resin Component Care

Leather Band Care

Metal Component Care

Bacteria and Odor Resistant Band

Liquid Crystal Display (LCD) Visibility

Data Memory Precautions

User Maintenance and Care

General Watch Cleaning

Daily cleaning advice for the watch case, band, and buttons to maintain performance.

Dangers of Poor Watch Care

Risks associated with neglecting watch cleaning and maintenance.

Preventing Rust Formation

How dirt and moisture can lead to rust on metal watch components.

Preventing Premature Wear

How moisture and improper storage can cause premature wear on bands and bezels.

Preventing Skin Irritation

Advice for individuals with sensitive skin to avoid irritation from watch wear.

Battery Replacement and Water Resistance Check

Importance of professional battery replacement and checking water resistance.

Initial Battery Life

Information about the battery included for factory testing and its shorter lifespan.

Low Battery Power Indication

Signs of low battery power and the risk of malfunction.