● Switching between 12-hour and 24-
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
3. Use (A) and (D) to move the pointer to
[TIME ADJUSTMENT].
4. Press (C).
5. Use (A) and (D) to move the pointer to
[12/24H].
6. Press (C).
7. Use (A) and (D) to select [12H] (12-hour
timekeeping) or [24H] (24-hour
timekeeping).
8. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the time
adjustment screen will re-appear.
9. Press (E) twice to exit the setting screen.
●
While 12-hour timekeeping is selected,
[P] will be displayed for p.m. times.
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where connection with
a phone may cause problems, you can
perform the procedure below to disable auto
time adjustment. To re-enable auto time
adjustment, perform the same operation
again.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
3. Use (A) and (D) to move the pointer to
[AIRPLANE MODE].
4. Press (C).
5. Use (A) and (D) to select an Airplane
Mode setting.
[OFF] Exits Airplane Mode.
[ON] Enables Airplane Mode.
6. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Timekeeping
Mode setting screen will re-appear.
7. Press (E) to exit the setting screen.
●
is displayed while the watch is in the
Airplane Mode.
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch’s other settings.
Also, you can use the CASIO “G-SHOCK
MOVE” app to view training records and
create training plans.
Note
●
This function is available only while G-
SHOCK MOVE is running on the
phone.
●
This section describes watch and
phone operations.
X
: Watch operation
Y
: Phone operation
Getting Ready
To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
●
A
Install the required app on your
phone.
In Google Play or the App Store, search for the
CASIO “G-SHOCK MOVE” app and install it
on your phone.
●
B
Configure Bluetooth settings.
Enable the phone’s Bluetooth.
Note
●
For details about setting procedures,
see your phone documentation.
Operation Guide 3481
8
To Next Page
Loading...
Need help?
General
