Casio 5193

Operation Guide 5193
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
This watch does not have a city code that corresponds to the UTC offset of –3.5
hours. Because of this, the radio-controlled atomic timekeeping function will not
display the correct time for Newfoundland, Canada.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage
or loss suffered by you or any third party arising through the use of this product or
its malfunction.
MA1012-EA
E-2
About This Manual
Button operations are indicated using the letters A
through D shown in the illustration.
Hand Functions
z
Hour Hand
x
Second Hand
c
Minute Hand
v
Left Dial Hand: Indicates the current mode.
b
Lower Dial Hand
n
Right Dial Hands
m
Day
This User’s Guide uses numbers shown above to identify
watch hands and indicators.

B +
* 6> 5
@
E-3
Things to check before using the watch
1. Hold down C for about two seconds to enter the Timekeeping Mode, and
then observe the movement of the
x
Second Hand.
Is the
x
Second Hand moving smoothly in one-second intervals?
Is the
x
Second Hand moving at
two-second intervals or is it stopped
completely?
Go to step 2.
The watch is charged suffi ciently.
For details about charging, see
“Charging the Watch” (page E-10).
Power is low. Charge the watch by placing
it in a location where it is exposed to light.
For details, see “Charging the Watch”
(page E-10).
NO
YES
YES
NEXT
E-4
2. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City settings” (page E-34) to confi gure
your Home City and daylight saving time settings.
Important!
Proper time calibration signal reception and World Time settings depend on correct
Home City, time, and date settings in the Timekeeping Mode. Make sure you
confi gure these settings correctly.
3. Set the current time.
x To set the time using a time calibration signal
See “To get ready for a receive operation” (page E-23).
x To set the time manually
See “Confi guring Current Time and Date Settings Manually” (page E-38).
E-5
The watch is now ready for use.
For details about the watch’s radio controlled timekeeping feature, see “Radio
x
Controlled Atomic Timekeeping” (page E-18).
E-6
Contents
E-2 About This Manual
E-3 Things to check before using the watch
E-10 Charging the Watch
E-17 To recover from the sleep state
E-18 Radio Controlled Atomic Timekeeping
E-23 To get ready for a receive operation
E-26 To perform manual receive
E-28 To check the result of the latest receive operation
E-30 Mode Reference Guide
E-31 To determine the watch’s current mode
E-31 To return to the Timekeeping Mode from any other mode
E-32 To select a mode
E-7
E-33 Timekeeping
E-34 Confi guring Home City Settings
E-34 To confi gure Home City settings
E-36 To toggle the Home City time between standard time and daylight
saving time
E-38 Confi guring Current Time and Date Settings Manually
E-38 To change the current time setting manually
E-41 To change the current date setting manually
E-44 Using the Stopwatch
E-45 To perform elapsed time measurement
E-45 To perform an elapsed time operation
E-45 To pause at a split time
E-8
E-47 Using the Countdown Timer
E-48 To specify the countdown start time
E-49 To perform a countdown timer operation
E-50 To stop the alarm
E-51 Checking the Current Time in a Different Time Zone
E-52 To view the time in another time zone
E-53 To specify standard time or daylight saving time (DST) for a city
E-55 To swap your Home City and World Time City
E-57 Using the Alarm
E-58 To change the alarm time setting
E-58 To turn the alarm on or off
E-58 To stop the alarm
E-59 Adjusting Home Positions Manually
E-59 To adjust the home positions manually
E-9
E-63 Troubleshooting
E-72 Specifi cations

Casio 5193 Specifications

General

Brand	Casio
Model	5193
Category	Watch
Language	English

Summary

About This Manual

Things to Check Before Using the Watch

Essential checks before operating the watch for the first time.

Charging the Watch

Power Levels

How to check the watch's power level using the second hand.

Power Recovery Mode

Explains the mode where hand operation stops temporarily when power drops.

Power Saving

Recovering from Sleep State

Steps to take to exit the watch's sleep state.

Radio Controlled Atomic Timekeeping

Approximate Reception Ranges

Details on signal reception range for different transmitters.

Getting Ready for Receive Operation

Steps to prepare the watch for receiving time calibration signals.

Auto Receive

Automatic daily reception of time calibration signals.

Performing Manual Receive

How to initiate a manual time calibration signal receive operation.

Checking Latest Receive Operation Result

How to verify the outcome of the last signal reception attempt.

Atomic Timekeeping Precautions

Important notes and warnings regarding atomic timekeeping.

Mode Reference Guide

Selecting a Mode

How to navigate and switch between the watch's different modes.

Timekeeping Mode

Using the Timekeeping Mode to view current time and date.

Configuring Home City Settings

To Configure Home City Settings

Steps to select your Home City and its daylight saving time setting.

To Toggle Home City Time Between STD and DST

How to switch between standard and daylight saving time for the Home City.

Configuring Current Time and Date Settings Manually

To Change Current Time Setting Manually

Procedure to manually adjust the watch's current time.

To Change Current Date Setting Manually

Procedure to manually adjust the watch's current date.

Using the Stopwatch

To Perform Elapsed Time Measurement

How to measure elapsed time using the stopwatch feature.

To Pause at a Split Time

How to pause the stopwatch to record split times.

Using the Countdown Timer

To Specify the Countdown Start Time

How to set the duration for the countdown timer.

To Perform a Countdown Timer Operation

How to start and stop the countdown timer.

Checking the Current Time in a Different Time Zone

To View the Time in Another Time Zone

How to check the time in 29 different world time zones.

To Specify Standard or Daylight Saving Time (DST) for a City

How to adjust DST settings for selected world time zones.

Swapping Your Home City and World Time City

Swap Home and World Time Cities

Procedure to exchange Home City and World Time City settings.

Using the Alarm

To Change the Alarm Time Setting

How to set the desired time for the daily alarm.

To Turn the Alarm On or Off

How to enable or disable the daily alarm.

To Stop the Alarm

How to silence the alarm when it sounds.

Adjusting Home Positions Manually

Manual Home Position Adjustment

Correcting hand and day alignment when they are off.

Troubleshooting

Hand Movement and Position Issues

Problems related to the movement and alignment of watch hands.

Current Time Setting Errors

Issues causing incorrect hour or day indications for the current time.

World Time Display Errors

Problems with the displayed time for different time zones.

Charging Issues

Troubleshooting steps when the watch does not resume operation after charging.

Signal Reception Problems

Diagnosing issues with time calibration signal reception.

Specifications

Accuracy and Timekeeping Details

Technical specifications for accuracy, timekeeping, and calendar.

Stopwatch and Countdown Timer Specifications

Technical details for stopwatch and countdown timer functions.

World Time and Alarm Specifications

Technical details for world time and alarm features.

Power Supply and Operating Time

Information on the watch's power source and battery life.