Need help?Do you have a question about the Casio 732 and is the answer not in the manual?
Set digital time, date, and 12/24-hour format.
Set analog hands by pulling and turning the crown.
Select display unit between meters (M) or feet (F).
Stores up to 10 sets of log data, including submerged time and max depth.
Switch to Depth Measurement Mode for diving/snorkeling.
Explains display elements like present depth, submerged time, and maximum depth.
Recall and delete stored log data from memory.
Measure elapsed time, split times, and two finishes.
Set alarm time and toggle daily alarm and hourly time signal.
Explains depth calculation, ranges, and sensor operation.
Automatic and manual reset of the depth measurement sensor.
Explains standard values and how absolute water pressure is displayed.
Procedure to exit Depth Measurement Mode under specific conditions.
Indicates weak battery, depth reading errors, or sensor errors.
Covers temperature, depth variations, and diving environment impacts.
To Next Page
General