11.3.14 EOX : End of System Exclusive Message
Format: 11110111B (F7H)
This is the End of System Exclusive Message status byte established by the MIDI standard.
12 Parameter Operations
There are two parameter unit operations: Individual Parameter Transfer and Individual Parameter
Request. For one session, in response to an IPR (Individual Parameter Request) from an external
device, this Instrument returns an IPS (Individual Parameter Send) or the session is concluded when
the external device or this Instrument spontaneously sends an IPS. If this Instrument received an IPS,
the value of the applicable parameter is changed. Depending on the function of a parameter, Individual
Parameter Send may be used to issue a command to the Instrument and Individual Parameter Request
may be used to check Instrument status information.
Data Receiver Data Sender Operation
IPR → Send Request(Optional)
← IPS Data Transfer
26
To Next Page
Loading...
