15 Patch Parameter
The main function of patch parameters is to configure the settings of the sound source of a device.
15.1 Master Tune Parameter
These parameters configure the Master Tuning settings.
Parameter ID R/W Block Size Array Min-Def-Max Description
Master Fine Tune 0001 R/W 55-0:0 10 01 0000-0200-03FF -100 - 0 - +99.8(cent)(1unit=100/512cent)
Master Coarse Tune 0002 R/W ↑ 7 01 00-40-7F -24 - 0 - +24(semitone)
15.2 System Chorus Parameter
These parameters are for configuring system chorus settings.
Parameter ID R/W Block Size Array Min-Def-Max Description
Type 0050 R/W ↑ 7 01 00-02-0F (Note1)
Rate 0051 R/W ↑ 7 01 00-03-7F 0-127
Depth 0052 R/W ↑ 7 01 00-13-7F 0-127
Feedback 0053 R/W ↑ 7 01 00-00-7F 0-127
Tone 0054 R/W ↑ 7 01 00-7F-7F 0-127
Note1: For information about the relationship between setting values and send/receive values, see Spec Number in “18.7
Chorus Type Setting Value Table” in “VII Setting Values and Send/Receive Values” of this document.
15.3 System Reverb Parameter
These parameters are for configuring system reverb settings.
Parameter ID R/W Block Size Array Min-Def-Max Description
Type 0080 R/W 000000 7 01 00-13-1B (Note1)
Time 0081 R/W ↑ 7 01 00-40-7F 0 - 127
Early Reflection 0082 R/W ↑ 7 01 00-40-7F 0 - 127
High Damp 0084 R/W ↑ 7 01 00-67-7F 0 - 127
Tone 0085 R/W ↑ 7 01 00-65-7F 0 - 127
Note1: For information about the relationship between setting values and send/receive values, see Spec Number in “18.6
Chorus Type Setting Value Table” in “VII Setting Values and Send/Receive Values” of this document.
15.4 Portamento Parameter
These are tone portamento operation setting parameters.
Parameter ID R/W Block Size Array Min-Def-Max Description
Portamento Time 0064 R/W 55-0:0 7 01 00-00-7F 0 - 127
Potamento OnOff 0065 R/W ↑ 1 01 00-00-01 0...Off
1...On
28
To Next Page
Loading...
