Playing with a Rhythm Backing
EN-26
A “fill-in” is a short phrase played where you want to change
the mood of a piece. A fill-in pattern can be used to create a
link between two melodies or as an accent.
1.
While a rhythm is playing, press the PTRN
button and then select a pattern.
2.
Press the FILL-IN button.
With some patterns, the fill-in continues until the end of
the measure where it is inserted. FILL is displayed while
a fill-in is playing.
• To continue the fill-in into the next measure, keep the
FILL-IN button depressed.
• Pressing the FILL-IN button while a rhythm is stopped
will insert the fill-in and cause it to be played as soon
as rhythm play is started. In this case, pressing the
FILL-IN button again before starting rhythm play will
remove the fill-in.
Playing a chord with your left hand automatically adds bass
and harmony accompaniment parts to the currently selected
rhythm. It is just like having your own personal back up group
on call.
1.
In the Rhythm Mode, press the ACMP button.
This causes “AC” to appear on the display and enables
chord fingering with the accompaniment (left-side)
keyboard.
2.
Press a to start the rhythm.
3.
Play something on the accompaniment
keyboard.
This will sound the bass, harmony, and other non-rhythm
part instruments.
• Playing a chord while rhythm play is stopped will cause
rhythm and accompaniment to start at the same time.
4.
Play other chords with your left hand as you
play the melody with your right hand.
5.
Press the ACMP button again to stop the
accompaniment.
Inserting a Fill-in Phrase Fingering a Chord to Play a
Rhythm Accompaniment
To Next Page
Loading...
