— 4 —
Power off
To continued pushing
J-feed button, and
To set the MODE
switch to Program.
Header printing
To release from the
J-feed button.
0000000000
D1D2D3D4D5
P1
0
D1 ~ D5
#-2
XXXX: Rom Control No.
-- XXXX --
D1D2D3D4D5
---------------
4. INITIALIZE
By Initialize code
Init. A: The format is done of EEPROM, and, without it is read, and Init. Code is written in.
Init. B: The data is read from EEPROM.
4-1. MAC
To hang initial start-up of CPU and peripheral device, and All Clear makes memory.
When there is Data backed up by EEPROM, by Initialize code, to develop it on Memory top.
Operation Display Printing
Input value D1 ~ D5
D1 0: YYMMDD
1: MMDDYY
2: DDMMYY
D2 1: General (Add2, DDMMYY)
2: US (Add2, MMDDYY)
3: General (Add3, DDMMYY)
5: Canada (Add2, MMDDYY)
D3,D4 Department No. General 15
US 30
D5 Clerk specification Switch: 1,2,4
Password No.: 0 (U.S.A. & Canada)
Note: Operation code with Init.B is set up as with settlement in “00000”
To Next Page
Loading...
Need help?
General
