Casio CFX-9800G

*Specifying 0 sets ihe number of significant digits to-10. Though the display only shows
up.to nine significant digits, 10 are used internally.” :
*Note that the number of signification digits setting is cancelled whenever you switch bi
tween the Norm 1 and Norm 2 display formats (see page 60).
The specification for the number of significant digits is applied to the displayed value only.
The calculator still stores the entire 15-digit mantissa and 2-digit exponent of the result
in memory. If you change the number of significant digits specification while a calculation
result is displayed, the display changes to show the result using the new specification.
To specify the display format
SHIFT) (UISP)
3} (Nrm) &2)
Norm A
*The display format switches between Norm 1 and Norm 2 each time you perform the
above operation. See page 60 for full details on Norm 1 and Norm 2.
The specification for the display format is applied to the disptayed value only. The calcu-
fator still stores the entire 15-digit mantissa and 2-digit exponent of the result in memory.
If you change the display format specification while a calculation result is displayed, the
display changes to show the result using the new specification.
To specify the Engineering Mode
SF
;
|
[Sei]
eMENsind
&
*
BEng
es
Ere,
a]
Each time you press (n)QsiFa (Eng) G2), the unit enters or exits the Engineering Mode.
The engineering specification is applied to the displayed value only. The calculator still:
stores the entire 15-digit mantissa and 2-digit exponent of the result in memory. If you
change the engineering specification while a calculation result is displayed, the display
changes to show the result using the new specification.
Color
Contrast
Adjustment
Highlight
the
OPTION
icon
on
the
Main
Menu
and
then
press
Gj.
BLUE
GREEN a
CONTRAS TL
(INIT)
..
Returns
tint
to
default
setting.
(2(IN-A)
.-
Returns
tint
and
contrast
to
default
setting.
*To
adjust
the
contrast
.
1,
Use
@
and
@
to
move
the
pointer
to
CONTRAST.
2.
Use
©
to
make
the
figures
on
the
display
darker
or
@
to
make
them
lighter.
You
can
change
the
c
ing
i i i
ae.
gi
ontrast
setting
in
greater
increments
by
pressing
9)
and
then
@
3.
Press
(9
to
return
to
the
Main
Menu.
*To adjust the tint
1,
Use
©
and
@
to
move
the
pointer.to
the
color
you.
want
to
adjust
‘ORANGE,
BLUE,
GREEN).
:
aa
;
:
2,
Use
®
to
move
the
setting
toward
the
G
reen)
sit
r
h
(
rani
°
©
ing
towai
1
G
(green)
side
or
@
to
move
it
to
the
O
(orange)
3.
Press
to
return
to
the
Main
Menu.
When
adjusting
the
color
contrast,
first
the
tint
of
each
individual
color,
*You
can
also
adjust
the
overall
contrast
whenever
any
other
screen
is
shown
on the
display
by
pressing
and
then
@
or
i
i
ji
Want
Gece
@
or
®.
Press
Gi
again
to
exit
the
contrast
adjust-
adjust
overall
display
contrast,
and
then
adjust
—3)/—