E-22
Using the Song Bank
A selection of 100 Song Bank tunes comes built-in for your
listening enjoyment or play along fun. You can turn off the
left-hand or right-hand part to practice with the remaining
part.
Playing Back a Song Bank Tune
To play back a Song Bank tune
1
Set the POWER/MODE switch to NORMAL.
2
Adjust the main volume and accomp volume.
3
Press the SONG BANK button to enter the Song
Bank Mode.
4
Use the Song Bank list to find the tune you want to
play back, and then use the number buttons to input
the tune’s two-digit number.
Example: To select “50”, input 5 and then 0.
• Not all of the available songs are shown on the song
bank list printed on the keyboard console. For a
complete list, see the “Song List” on page A-6.
NOTE
•“00” is the initial default Song Bank tune setting
whenever you turn on keyboard power.
• You can also increment the displayed tune number by
pressing [+] and decrement is by pressing [–].
• Before advancing to the next step, which actually starts
playback, you can adjust the tempo (page E-18), select
a tone (page E-15) for the melody part, or turn off the
left-hand or right-hand part (page E-25).
5
Press the PLAY/PAUSE button to start play of the
tune.
6
Press the STOP button to stop playback of the Song
Bank tune.
Appears when SONG BANK button is pressed
Number buttons
SONG BANK
TEMPOPOWER/MODE FF
REW
STOP
PLAY/PAUSE
MAIN VOLUME
ACCOMP VOLUME
A l oha Oe
Appears when PLAY/PAUSE
button is pressed
Chord name
CTK1100_e_22-26.p65 10.3.9, 5:14 PM22
To Next Page
Loading...
Need help?
General
