Casio CTK-4000 - Deleting All Data in Digital Keyboard Memory

Other Useful Digital Keyboard Functions
E-58
Use the following procedure when you want to delete sampled
sounds, user songs and all other data, except for recorded
songs, currently in Digital Keyboard memory.
• Performing this procedure also will delete protected
sampled sound data (page E-24). It is recommended
that you save important data to a memory card (page
E-59) or your computer’s hard disk (page E-65).
• This operation does not delete recorded song data.
1. Press
cs
and then use the
br
(10-key) [4] ( )
and [6] ( ) keys to display “DELETE” (page
E-6).
2. Press the
br
(10-key) [7] (ENTER) key.
3. Use the
br
(10-key) [4] ( ) and [6] ( ) keys
to display “All Data”.
4. Press the
br
(10-key) [7] (ENTER) key.
This displays a delete confirmation message.
5. Press the
br
(10-key) [+] (YES) key.
After the delete procedure is complete, “Complete” will
appear followed by the screen in step 2 of the above
procedure.
• To cancel the delete operation, press [–] (NO) or [9]
(EXIT) in place of [+] (YES).
Deleting All Data in Digital
Keyboard Memory
DELETE
Flashes
Used memory (Unit: Kbytes)
Remaining memory capacity
A l l D a t a
Flashes
Su r e?
B