Casio CTK-691

Other manuals for Casio CTK-691

Service Manual28 pages

Midi Implementation78 pages

Questions and Answers:

A
austinwilsonAug 20, 2025
How to fix no keyboard sound on Casio Synthesizer?
- S
  Shane WagnerAug 20, 2025
  If your Casio Synthesizer keyboard produces no sound, there are several potential causes. First, ensure the AC adapter is correctly attached, the batteries are properly inserted with correct polarity (+/–), and the batteries are not dead. Also, verify that the power is turned on by pressing the POWER button and that the volume is adequately raised using the VOLUME knob. If you are playing in the accompaniment keyboard area while the MODE button setting is CASIO CHORD or FINGERED, try turning off Auto Accompaniment. Check if Local Control is off and turn it on. Finally, ensure that Mixer channel 1 is turned on and its volume isn't too low by adjusting it in the Mixer.
S
sandra56Aug 21, 2025
What to do if auto accompaniment does not sound on Casio Synthesizer?
- D
  deborahgibsonAug 21, 2025
  If the auto accompaniment on your Casio Synthesizer isn't working, it might be due to several reasons. Check that the accompaniment volume isn't set to '000'; if it is, increase it using the ACCOMP VOLUME button. Also, ensure that Auto Accompaniment part Channels 6 through 10 aren't turned off; use the Mixer to turn them on. Finally, verify that the volume setting for Channels 6 through 10 isn't too low; if it is, raise the volume setting for the applicable channel using the Mixer.
M
Mark WilliamsAug 25, 2025
How to turn on touch response on Casio Synthesizer?
- T
  Tiffany CarterAug 25, 2025
  If the sound output on your Casio Synthesizer doesn't change when you vary key pressure, it's likely that the touch response is turned off. Press the TRANSPOSE/FUNCTION button to turn it on.
C
Christopher GonzalezAug 26, 2025
Why no sound when playing MIDI data from computer on Casio Synthesizer?
- R
  randallolsenAug 26, 2025
  If no sound is produced when playing MIDI data from a computer on your Casio Synthesizer, first, check that the MIDI cables are connected properly. If they are, use the Mixer to ensure that the channel is turned on and the volume setting is not too low.
L
Leah MorrisAug 28, 2025
How to record chord accompaniment data on computer with Casio Synthesizer?
- V
  Victor WhiteAug 28, 2025
  If you cannot record chord accompaniment data on a computer from your Casio Synthesizer, ensure that Accomp/Song MIDI Out is turned on.
Z
zsandersAug 29, 2025
What to do if Casio Synthesizer keyboard starts up abnormally?
- J
  Jordan MejiaAug 30, 2025
  If your Casio Synthesizer keyboard starts up abnormally when turned on, it could be due to corrupted flash memory. First, remove the batteries and disconnect the AC adapter, then press the POWER button. After this, reload the batteries and/or reconnect the AC adapter, and press the POWER button again to turn on the power. You can also try performing a system reset operation using the TRANSPOSE/ FUNCTION button.
V
veronicagarciaAug 31, 2025
Why Casio Synthesizer has a dim display and low volume?
- N
  Nicole SalazarAug 31, 2025
  If your Casio Synthesizer exhibits symptoms like a dim power indicator, failure to turn on, flickering display, low volume, distorted sound, interrupted sound at high volumes, sudden power failure, or abnormal rhythm, it's likely due to low battery power. Replace the batteries with a fresh set or use the AC adapter to resolve this issue.
B
Betty Pearson DDSSep 2, 2025
Why Casio Synthesizer plays two tones at once?
- D
  Denise CoxSep 2, 2025
  If you hear two tones when playing the keyboard on your Casio Synthesizer, it means that the layer function is turned on. To fix this, press the LAYER button to turn off layering.
A
Aaron ThomasSep 4, 2025
What to do if different tones sound on different keyboard ranges on Casio Synthesizer?
- B
  Brandon WestSep 4, 2025
  If different tones sound when keys in different keyboard ranges are pressed on your Casio Synthesizer, the split function is likely activated. Press the SPLIT button to turn off split and resolve this issue.
S
Sean ZavalaSep 6, 2025
Why key or tuning does not match when playing with MIDI machine on Casio Synthesizer?
- J
  jordanrobertsSep 7, 2025
  If the key or tuning doesn't match when playing along with another MIDI machine on your Casio Synthesizer, it could be due to incorrect tuning or transpose settings. Ensure that the tuning or transpose parameter is set to '00'. Also, check that the Mixer's coarse tune, fine tune, and octave shift settings are also set to '00'. Adjust these settings in the Mixer if necessary.

Casio CTK-691 Specifications

General

Number of Keys	61
Display	LCD
MIDI	Yes
Power Supply	AC Adapter or Batteries
Rhythms	100
Keyboard	Touch Response
Speakers	12 cm x 2
Effects	Reverb, Chorus
Song Memory	5 songs
Connections	MIDI In/Out
Polyphony	32 notes

Summary

Safety Precautions

Symbols and Warnings

Explains symbols and warnings (DANGER, WARNING, CAUTION) for safe product use.

Handling Hazards

Instructions for immediate actions concerning battery fluid, smoke, odor, overheating, and AC adaptor misuse.

General Safety Guidelines

Covers safety for AC adaptor cords, batteries, water/foreign matter, disassembly, dropping, plastic bags, and product stability.

Operational Safety

Hearing and Physical Safety

Power Supply

Using Batteries

Instructions for loading batteries and important information regarding battery life and symptoms of low power.

AC Adaptor Safety and Usage

Crucial safety precautions, specifications, and usage guidelines for the AC adaptor to prevent hazards.

Auto Power Off Function

Keyboard Initialization

Procedure for initializing the keyboard to restore factory default settings and clear memory.

Connections

Audio and Pedal Connections

Guides on connecting headphones, audio equipment, amplifiers, and pedals like sustain and sostenuto.

Basic Operations

Keyboard Operation Basics

Tone Selection and Types

Detailed guide on how to select tones and information on available tone categories.

Tone Configuration and DSP

Using the Drawbar Organ Mode

Selecting and Editing Organ Tones

Steps for selecting, editing, and saving drawbar organ tones and their parameters.

Applying Effects to Tones

DSP Effect Management

Guides on selecting DSP types, changing DSP parameters, and saving DSP settings.

Reverb and Chorus Effect Settings

Using the Equalizer

Auto Accompaniment

Auto Accompaniment Basics

Explains how the keyboard automatically plays accompaniment based on chords and rhythms.

Rhythm and Tempo Control

Guides on selecting rhythms, playing rhythms, and adjusting tempo for accompaniment.

Chord Input Methods

Rhythm Pattern Variations

One-touch Preset and Auto Harmonize

Explains one-touch presets for quick setup and auto harmonize for adding melody harmony.

Adjusting Accompaniment Volume

Mixer Function

Mixer Overview and Channel Assignments

Channel Control and Parameter Editing

Guides on turning channels on/off and using the parameter edit mode for detailed adjustments.

Synthesizer Mode

Creating Original Tones

Introduces the synthesizer mode for creating custom sounds by editing parameters.

Tone Parameters and Characteristics

Saving and Editing User Tones

Guides on saving created user tones to memory and editing existing ones.

DSP Settings in Synthesizer Mode

Registration Memory

Registration Memory Features

Explains the function of registration memory for storing and recalling keyboard setups.

Saving and Recalling Setups

Step-by-step instructions for saving a keyboard setup and recalling it later.

Song Memory Function

Song Recording Methods

Describes real-time and step recording methods for capturing songs.

Real-time Recording Process

Detailed steps for recording notes and accompaniment in real-time.

Step Recording Techniques

Guides on recording chords and notes step-by-step, including chord specification.

Multiple Track Recording

Editing Song Memory Contents

Procedures for correcting mistakes, deleting data, and editing recorded memory contents.

Troubleshooting

Common Keyboard Issues

Addresses problems like no sound, low battery symptoms, and auto accompaniment not sounding.

Operation and Connection Problems

Specifications

Related product manuals