E-95
Using the Function Menu
The function menu includes settings that normally need to be
accessed relatively infrequently, such as overall tuning,
equalizer, touch response, local control on/off, etc. It also
includes some memory card operations (format, etc.).
This section explains function menu operations. For details
about specific function menu items, see “Function Menu
Settings” (page E-96).
1.
Press the R-13 (FUNCTION) button.
• This displays the function menu like the one shown
below.
2.
To adjust the “Tune” (Tuning) and “EQ”
(Equalizer) settings, use the R-17 (t, y)
buttons to move 0 to the setting you want to
adjust, use the dial or the R-14 (–, +) buttons to
change the setting. The currently selected
setting will also be indicated by thick brackets
(%).
• Pressing the R-14 (–, +) buttons at the same time
returns the setting to its initial default.
3.
The setting items from “Performance” and
below are groups that include multiple setting
items. Use the following procedure to change
the settings of the items in each group.
R-14R-14
R-17R-17
R-15R-15
R-13R-13
R-16R-16
R-18R-18
C-13C-13
Using the Function Menu
To change the setting of a function menu
item
(1) Use the R-17 (t, y) buttons to move the 0 to the
desired group name and then press the R-16 (ENTER)
button.
• This displays the items included within the group.
(2) Use the R-17 (t, y, u, i) buttons to move 0 to
the setting you want to change.
(3) Use the dial or the R-14 (–, +) buttons to change the
setting value.
• Pressing the R-14 (–, +) buttons at the same time
returns an item to its initial default setting.
(4) To return to the function menu, press the R-15 (EXIT)
button.
Example: Performance group
CTK6200_e.book 95 ページ ２０１１年１２月２７日 火曜日 午後８時２０分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
