— 8 —
Message on LCD
7. Sound check
1 Press the “4” button. Min
* When standing in the center, the tester hears the minimum test sound in
an equal volume from both right and left speakers.
2 Press the “5” button. Mid
* When standing in the center, the tester hears the medium test sound in
an equal volume from both right and left speakers.
3 Press the “6” button. Max
* When standing in the center, the tester hears the maximum test sound in
an equal volume from both right and left speakers.
4 Press the "+" button. Left
* When standing in the center, the tester hears the maximum test sound
fromthe left speaker.
5 Press the "–" button. Right
* When standing in the center, the tester hears the maximum test sound
from the right speaker.
8. LCD check
1 Press the “STEP1” button.
* All character of LCD turns on.
* There is no lack of the dot and the character.
9. APO check
1 Press the “scoring” button.
* Go out from TEST mode (Power off).
* The LCD turns off.
DIAGNOSTIC PROGRAM IS FINISHED.