Casio CTK-900

Other manuals for Casio CTK-900

Service Manual28 pages

Midi Implementation80 pages

Questions and Answers:

J
Juan DoughertyAug 19, 2025
Why is there no sound from my Casio CTK-900 Electronic Keyboard?
- C
  Clayton HarmonAug 19, 2025
  Several factors could be at play. It might be a power issue, ensure the AC adapter is correctly attached, the batteries are correctly installed with the right polarity (+/–), and that they aren't depleted. Also, verify the keyboard is powered on and the main volume isn't set too low. If you're in CASIO CHORD or FINGERED mode, avoid playing in the accompaniment keyboard area. Check if Local Control is off, or if Mixer channel 1 is off or its volume is too low. To resolve this, turn on the power, increase the main volume, disable any accompaniment modes, turn on Local Control, and adjust Mixer channel 1 settings as needed.
S
stephensallenAug 21, 2025
What to do if auto accompaniment does not sound on Casio Electronic Keyboard?
- J
  Jason WilsonAug 21, 2025
  If the auto accompaniment isn't working on your Casio Electronic Keyboard, the accompaniment volume might be set to 000. Also, Auto Accompaniment part Channels 6 through 10 could be turned off, or their volume settings might be too low. To fix this, increase the accompaniment volume using the ACCOMP VOLUME button and use the Mixer to turn on channels 6 through 10 and raise their volume settings.
C
Craig BanksAug 25, 2025
What to do if my Casio CTK-900 Electronic Keyboard starts up abnormally?
- D
  David MorrowAug 25, 2025
  If your Casio Electronic Keyboard starts up abnormally, it could be due to corrupted flash memory or the keyboard automatically resetting due to abnormal flash memory data. Try these steps: First, remove the batteries and disconnect the AC adapter, then press the POWER button. Next, reload the batteries or reconnect the AC adapter, and press the POWER button again. Then, use the TRANSPOSE/ FUNCTION button to perform a system reset. Wait approximately 40 seconds until the 'Pls Wait' message disappears. If the problem persists, contact an authorized CASIO Service Provider.
N
Natalie ScottAug 26, 2025
Why does my Casio Electronic Keyboard sound unnatural when connected to a computer?
- T
  Thomas GriffinAug 26, 2025
  If your Casio Electronic Keyboard produces an unnatural sound when connected to a computer, the computer’s MIDI Thru function is likely turned on. You should turn off the MIDI Thru function on the computer or turn off Local Control on the keyboard.
T
Timothy MitchellAug 27, 2025
How to fix no sound when playing MIDI data from computer on Casio CTK-900?
- J
  Jordan SingletonAug 27, 2025
  If you're not getting any sound when playing MIDI data from a computer on your Casio Electronic Keyboard, it could be due to improperly connected MIDI cables. Alternatively, the channel might be turned off, or its volume setting could be too low. Double-check and properly connect the MIDI cables, then use the Mixer to turn the channel on and raise the volume setting.
E
Erik MendezAug 30, 2025
What to do if parts suddenly drop out during song memory playback on Casio CTK-900 Electronic Keyboard?
- S
  stephaniesheltonAug 30, 2025
  If parts suddenly drop out during song memory playback on your Casio Electronic Keyboard, it's likely that the number of tones being played simultaneously exceeds the keyboard’s limitation. Use the Mixer to turn off unnecessary channels and reduce the number of parts being played.
R
Richard SmithAug 31, 2025
How to fix some parts not playing during song memory playback on Casio CTK-900?
- A
  Anthony DavidsonAug 31, 2025
  If some parts aren't playing during song memory playback on your Casio Electronic Keyboard, the channels might be turned off or the volume setting could be too low. Use the Mixer to turn the channels on and check the volume settings.
P
Penny RobertsSep 2, 2025
What to do if Casio Electronic Keyboard key or tuning doesn't match with MIDI machine?
- J
  Jeffrey SmithSep 2, 2025
  If the key or tuning doesn't match when playing along with another MIDI machine on your Casio Electronic Keyboard, the tuning or transpose parameter might be set to a value other than 00. Alternatively, Mixer coarse tune, fine tune, and/or octave shift settings could be values other than 00. Change the transpose or tuning parameter value to 00 and use the Mixer to change the coarse tune, fine tune, and/or octave shift settings to 00.
E
Erin JohnsonSep 4, 2025
Why does playing keyboard sound two tones on Casio CTK-900 Electronic Keyboard?
- W
  william65Sep 5, 2025
  If your Casio Electronic Keyboard sounds two tones when playing, the Layer function is likely turned on. Press the LAYER button to turn off layering.
D
Dennis MorrisonSep 6, 2025
What does it mean if downloaded tone contains noise on Casio CTK-900 Electronic Keyboard?
- D
  delgadobrianSep 6, 2025
  If a downloaded tone with waveform contains noise or keyboard operations become abnormal when user data is selected on your Casio Electronic Keyboard, it is possible that the keyboard was turned off while data was being stored in Flash memory, or something else has corrupted the Flash memory contents. You can try to resolve this by performing a system reset using the TRANSPOSE/FUNCTION button. If the problem persists, contact an authorized CASIO Service Provider for maintenance.