Recording and Playing Audio
E-129
1.
Press the C-6 (AUDIO PLAY) button to enter the
audio play mode.
2.
Use the dial or the R-14 (–, +) buttons to display
the audio file you want to clear or delete.
• To clear the audio data in a file, display the number of
the file. File numbers run from 001 up to the maximum
number of audio recordings that you specified when
formatting the memory card (page E-137). In this case,
the file itself will not be deleted.
• To delete a file, display an audio file other than those
described above (audio file saved to the memory card
using Data Manager*).
3.
While holding down the R-13 (FUNCTION)
button, press the C-17 (MENU) button to display
the audio play menu.
4.
Use the R-17 (y) button to move the 0 to
“Clear” (or “Delete”) and then press the R-16
(ENTER) button.
5.
In response to the confirmation message that
appears, press the R-14 (YES) button to perform
the applicable operation or the R-14 (NO) button
to cancel.
To clear the data of an audio file or delete an
audio file
* For details, see “Storing and Loading Digital
Keyboard Memory Data” (page E-146).
CTK7300IN_e.book 129 ページ ２０１３年７月１９日 金曜日 午後１２時１分
To Next Page
Loading...
