— 25 —
Wro
n
g
Da t
Con
ver t
Pro
tect
No
File
No
Disk
No t
S
SMF0
Mem
Fu l l
Dis
kFul l
Dis
kR/W
For
ma t
Rea
dOn l
y
FDD ERROR MESSAGE
Error Message Reason of Error
The file being written to is read-only.
The disk format is not one supported by this key-
board.
Error occurred during reading from the disk.
Disk is full.
Not enough memory to perform the process.
No memory is available to load data.
An attempt was made to play data that is not SMF
FORMAT 0.
An attempt was made to access a disk while no disk
is loaded in the drive.
There is no file that corresponds to the file that was
specified.
A save or delete operation was attempted with a
disk that is write protected.
The attempted file conversion was not successful.
Something is wrong with the data you are trying to
load.
To Next Page
Loading...
Need help?
General
