To Next Page

To Previous Page

Using the Mixer

E-41

• For details about how initial default settings are configured

when you perform the following procedure, see “Parameter

List” (page E-127).

While the mixer screen is displayed, hold down

the R-13 (FUNCTION) button as you press the

C-13 (MENU) button.

• This displays the mixer menu screen with the 0 next to

“Initialize”.

Press the R-16 (ENTER) button.

In response to the “Sure?” message that

appears, press the R-14 (YES) button to

initialize all mixer parameters or the R-14 (NO)

button to cancel.

While the mixer screen is displayed, hold down

the R-13 (FUNCTION) button as you press the

C-13 (MENU) button.

• This displays the mixer menu.

Use the R-17 (y) button to move the 0 to

“Display” and then press the R-16 (ENTER)

button.

Use the dial or R-14 (–, +) buttons to change the

setting.

After the setting is the way you want, press the

R-15 (EXIT) button to exit the menu.

To initialize all mixer parameters To change the information displayed by the

level meter while configuring part parameter

settings

To select display of this

information:

Select this setting:

Part parameter setting values Param

Volume level Meter

CTK6000_e.book 41 ページ２０１０年７月１２日　月曜日　午後１２時５０分

Casio CTK6000 User Manual

Questions and Answers: