Casio DM-100 User Manual

8. Upper keyboard Sampling Function
T) Select one of the 4 sample buttons.
(2) Press the effect select button followed
by any desired effect key (loop, reverse, Select
6 envelopes).
* The reverse effect takes 3-6 seconds to apply.
* Loop and reverse effects can be performed and cancelled by turns
each time the effect key is pressed.
* Three effects (loop, reverse, one of 6 envelopes) can be simultane-
ously applied to a sample sound.
* All effects can be cancelled by pressing the effect select button
followed by the clear key.
<6 envelopes >
seine Piano/guitar damped tone, slow decay.
ae Long release (damped tone), slower decay
than @.
Eve Reverb, some sustain after decay begins.
vads Slow attack, slow increase of volume at
beginning.
... Tremolo |, fade out with slight vibrato.
Tremolo II, slight vibrato.
* Sample tune
The pitch of sampled sounds can be easily tuned to
A4 of the upper keyboard with the sample tune
function.
@ Press one of 4 sample buttons to be maa
tuned, followed by either of the sam- ° ° ° '
ple tune buttons (A) (V).
* A continuous sound in the standard pitch (A4 of
the upper keyboard) will be heard together with
the sampled sound for comparison.
(2) Hold down the tune up button (A) to
raise the pitch, or the tune down but-
ton ( V) to lower the pitch. Release the
button at the point where the standard
pitch sound and the sampled sound
are tuned.
* The pitch of the sampled sound can be changed in the range of one
octave, with the original pitch being at the mid-point of the octave.
* Simultaneously pressing the tune up (&) and down (Y) buttons allows
comparison between the sampled sound and standard pitch (A4 of
the upper keyboard) without raising or lowering the original pitch
of the sampled sound.
Y SAMPLE TUNE à

Casio DM-100 Specifications

General

Brand	Casio
Model	DM-100
Category	Musical Instrument
Language	English