— 10 —
DT-X200/DT-X8
Item Specifi cations
NFC Communication Protocol
Standards
Supported
Operation-check confi rmed IC
ISO14443 Type A
MIFARE Standard/MIFARE Ultralight
ISO14443 Type B
JICSAP
* Before introducing, prior confi rmation of card is required as
some cards may be out of ISO standard.
Felica (JIS X 6319)
Felica Standard
ISO15693
I•CODE SLI, I•CODE SLI-S, I•CODE SLI-L, my-d VID plain,
my-d Light, Tag-it plus, Tag-it pro, Tag-it standard
* It will take time to write data to Tag-it. Also, there are some
commands that require retry on application.
ISO18092
Communication
between terminals
* Not supported by software
ISO18092
Card mode
USB Host Transmission rate: Full speed (12 Mbps), Low speed (1.5 Mbps)
External output power: 5V ± 0.25V/100 mA
Client Transmission rate: Full speed (12 Mbps)
USB power feeding: 5.0V ± 0.25V/500mA or more
microSD SDHC supported
Extension Port
Speaker Monaural
Microphone Monaural
<
Power Supply/Data Communication Terminals
>
1 2 3 4 5 6
Pin No. Name Function Input/Output
1 V CRADLE I/O box power -
2 D+ USB D+ IN / OUT
3 D– USB D– IN / OUT
4 USB_ID USB host/client switching IN
5 V BUS USB power -
6 GND GND -
To Next Page
Loading...
Need help?
General