71
Card type Support command
my-d Light Read Single Block, Write Single Block,
Write AFI, Lock AFI,
Tag-it HF-I Plus
*1
Read Single Block, Write Single Block,
Lock Block, Read Multiple Blocks,
Write AFI,
Write DSFID,
Get System Information,
Get Multiple block Security Status
Tag-it HF-I Pro, Tag-it HF-I Standard
*1
Read Single Block, Write Single Block,
Lock Block
*1 Write Single Block / Lock Block / Write AFI / Write DSFID to Tag-it Series tags
When using the command, you must perform the command retry process in the application.
For details, refer to the NFC Library Manual.
[Remarks] The IC card memory configuration and command specifications may differ depending on
the card being used.
For details, please refer to the individual specifications of each card.
To Next Page
Loading...
Need help?
General