Casio EQS-A1000 User Manual

Operation Guide 5143
E-9
While crown button mode switching is disabled, pressing the crown button will x
cause the
x
Second Hand to move to the 3 o’clock position. The
x
Second Hand
will resume normal timekeeping when you release the crown button.
To re-enable crown button mode switching
Hold down the crown button as you press A.
E-8
Note
If you do not perform any operation for more than three minutes after pulling out the
x
crown, crown operations will become disabled automatically. If this happens, push
the crown back in and then pull it out again to re-enable crown operations.
Disabling Crown Button Mode Switching
You can use the following operation to disable crown button mode switching.
This helps to prevent accidental mode changes while wearing the watch.
To disable crown button mode switching
Hold down the crown button for at least two seconds until the watch beeps and 1.
then press A.
At this time the x
x
Second Hand will move to the 3 o’clock position.
Release both buttons.2.
The watch will return to normal timekeeping.
x
E-7
Note
You can use high-speed hand movement when confi guring time settings in the
x
Timekeeping Mode, Alarm Mode, or Countdown Timer Mode, or when adjusting the
home positions of the hands.
Pushing the Crown In
Carefully press the button of the crown the push the crown back in.
Important!
To prevent unintentional operation, the button press operation of the crown
x
becomes disabled automatically for about eight seconds after you push the crown
back in. It will become re-enabled after about eight seconds.
E-6
High-speed 1
With the crown pulled out, rotate it rapidly away from you two times.
High-speed 2
After starting the High-speed 1 operation, rotate the crown rapidly
away from you two more times.
High-speed Cancel
Rotate the crown towards you or press any button.
E-5
Pulling the Crown Out
After unlocking the crown, grasp the ring and pull the crown out.
Rotating the Crown
With the crown pulled out, grasp the ring and rotate the crown
towards you to move the hands of the watch.
You can also perform high-speed hand movement using the
operations described below. Note that there are two levels of high-
speed movement (High-speed 2 is faster).
Use High-speed 2 when changing the minute hand setting in the
x
Timekeeping Mode, Timer Mode, and Alarm Mode.
E-4
Note that rotating the ring without pushing it down as far as it will go will change the x
settings of the watch. When locking the crown, be sure to press down fi rmly on the
ring as you rotate it.
Unlocking the Crown
Rotate the ring part of the crown towards you until it loosens
completely.
Pressing the Crown Button
You can press the crown button while the crown is locked.
Crown ring
Press
E-3
Using the Crown
The crown of this watch has a button part and a ring part. You can use the crown’s
button and ring to perform a number of different crown operations.
Locking the Crown
To lock the crown, push down its ring part as far as it will go as you
rotate the ring away from you until it is relatively tight. While the
crown is locked correctly, the only crown operations possible are
pressing the crown button and unlocking the crown.
Important!
Push down on the ring as you slowly rotate it. You should be able to feel it screwing
x
securely into place.
You should normally have the crown locked during normal daily use. Leaving the x
crown unlocked creates the risk of unintended operations or even damage due to
impact.
E-2
About This Manual
In this manual, operations are performed using the watch’s
crown, and the three buttons indicated by the letters A,
B and C.
Hands and Indicators
z
Hour Hand
x
Second Hand
c
Minute Hand
v
Mode Disk: Rotates to indicate the current mode and
other information.
b
Chronograph Signal
n
Day
This User’s Guide uses numbers shown above to identify
watch hands and indicators.

+
6*>
@B
MA1203-EB
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
Note that the product illustrations in this manual are intended for reference only,
x
and so the actual product may appear somewhat different than depicted by an
illustration.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss suffered by you or any third party arising through the use of this
product or its malfunction.

Casio EQS-A1000 Specifications

General

Brand	Casio
Model	EQS-A1000
Category	Watch
Language	English

Summary

About This Manual

Hands and Indicators

Identifies watch hands and indicators using numbers and labels.

Using the Crown

Locking the Crown

How to lock the crown to prevent unintended operations.

Unlocking the Crown

Procedure to unlock the watch crown.

Pulling the Crown Out

Steps to pull the watch crown out for setting.

Rotating the Crown

How to rotate the crown to adjust watch settings.

Pressing the Crown Button

How to use the crown button for operations.

Pushing the Crown In

How to push the crown back in to lock it.

Disabling Crown Button Mode Switching

How to disable mode changes via the crown button.

To re-enable crown button mode switching

How to re-enable mode switching via the crown button.

Things to check before using the watch

Charging the Watch

Power Recovery Mode

Charging Times

Power Saving

To recover from the sleep state

Steps to wake the watch from its sleep state.

Mode Reference Guide

Mode Disk Pointers

Explains the function of the mode disk pointers.

Mode Pointer

Describes the mode pointer on the mode disk.

Split Pointer

Explains the split pointer on the mode disk.

Lap Pointer

Explains the lap pointer on the mode disk.

Selecting a Mode

To determine the watch's current mode

How to identify the current mode.

To return to the Timekeeping Mode from any other mode

How to return to the main timekeeping mode.

To select a mode

Procedure for cycling through watch modes.

Timekeeping

Timekeeping: Hands and Indicators

Identifies watch hands and indicators for Timekeeping mode.

Configuring Home City Settings

To configure Home City settings

Steps to set the Home City and check its code.

Daylight Saving Time (DST)

Explanation of Daylight Saving Time settings.

To toggle the Home City time between standard time and daylight saving time

How to switch between STD and DST for the Home City.

Configuring Current Time and Date Settings

To change the current time setting

Procedure to adjust the current hour and minute.

To change the current date setting

Procedure to adjust the current year, month, and day.

Using the Stopwatch (Stopwatch Split Mode)

Stopwatch Split Mode: Hands and Indicators

Identifies hands and indicators for stopwatch mode.

Stopwatch Split Mode: To perform elapsed time measurement

Steps to measure elapsed time.

Stopwatch Split Mode: To perform an elapsed time operation

How to start and stop elapsed time measurement.

Stopwatch Split Mode: To pause at a split time

How to pause the stopwatch to record a split time.

Using the Stopwatch (Stopwatch lap mode)

Stopwatch Lap Mode: Hands and Indicators

Identifies hands and indicators for lap mode.

To enter and exit the Stopwatch Lap Mode

Steps to access and leave the lap mode.

Stopwatch Lap Mode: To perform an elapsed time operation

How to start and stop elapsed time in lap mode.

To perform lap time measurement

How to record lap times.

To recall lap data

How to view stored lap times and fastest lap.

Using the Countdown Timer

Countdown Timer: Hands and Indicators

Identifies hands and indicators for countdown timer.

To specify the countdown start time

How to set the countdown duration.

To perform a countdown timer operation

How to start and stop the countdown timer.

Using the Alarm

Alarm Mode: Hands and Indicators

Identifies hands and indicators for alarm mode.

To change the alarm time setting

How to set the alarm hour and minute.

To check the AM/PM setting of the alarm

How to check the AM/PM setting for the alarm.

To turn the alarm on or off

How to enable or disable the alarm.

To stop the alarm

How to stop the alarm when it sounds.

Checking the Current Time in a Different Time Zone

World Time Mode: Hands and Indicators

Identifies hands and indicators for World Time mode.

To view the time in another time zone

Steps to see the time in a selected World Time city.

To check whether a time zone is AM or PM

How to check AM/PM for a World Time city.

To specify standard time or daylight saving time (DST) for a city

How to set STD/DST for a specific city.

Adjusting Home Positions

To adjust home positions

Detailed steps for adjusting watch hand and day alignment.

Troubleshooting

Crown Operations

Addresses issues related to watch mode switching and crown functionality.

Specifications

City Code Table

Reference list of city codes and their GMT differentials.