Casio FP-200 - Budget Control; Program Outline; Directions

BUDGET CONTROL
t~Z•Sttlui•ttOffl
This program permits establishing a budget for
each
account title and controlling the appropria-
tions from the budget by inputting the date and
amount of an appropriation each time it is made.
The items to be entered are the account titles,
amount of the budget, and dates and amounts of
appropriations. Each time these items are input,
the program calculates the balance of the budget
and the rate of execution of the budget. The
capabilities of this program include screen dis-
play
and storing of data, deletion of unnecessary
account titles, and printout of stored data, as
well as
the totaling capability.
This application requires a nopr,y disk.
' .. \ ' ~:
II{ ··J..J, I
'' ' ~\-~:,-····----- -
'-----· / -::_ :; ~-- .__
.> W·; - ~
\ '
._ __ ' =
A floppy disk is used for a random access file for storing data, allowing data transfer at
relatively high speeds.
l•JIZ44H·J,tl
This program uses two random access files. Therefore, you should execute MOUNT 2
in direct mode before executing the program. (Once this command has been executed,
it is effective even after the power is turned off.} If a new floppy disk is used for stor-
ing the data, execute the FORMAT command.,
When the program is started, it displays the following menu.
0
** Budg_et: ·c::on"t:,:-ol **
(1)
Sto~el
: '
(2]
Display
(3]
Delete
-(4]
Print
[5]
End
***STORING***
[1JAccount title
[2JBudget execution
[3JMenu
By pressing any_ key from 1 to 5, it is possible to execute the associated operation.
Note, however, that when this program is executed for the first time (when no data has
been
stored). operations 3 to 5 cannot be performed.
( 1) Storing
When this mode is specified, the program displays the following menu 6:
56