179
Appendix
Appendix E 2-byte Command Table
Spaces in the following commands are indicated by “]”.
OPTN menu commands
d
/dx(, Max(, Min(, Mean(, Median(, Seq(, Dim, Fill(, Sum, List
VARS menu commands
Y, Xt, Yt, Xmin, Xmax, Xscl, Ymin, Ymax, Yscl, Tmin, Tmax, Tptch, Xfct, Yfct, Q1, Q3,
x1, y1, x2, y2, x3, y3, F]Start, F]End, F]pitch, c
Commands available with the W key
If, Then, Else, IfEnd, For, To, Step, Next, While, WhileEnd, Do, LpWhile, Return,
Break, Stop, ClrText, ClrGraph, ClrList, DrawGraph, DrawStat, DrawTG-Con,
DrawTG-Plt, DispTable
Commands available with the 3 (MENU) key in the PRGM Mode
1-Variable, 2-Variable, LinearReg, Med-MedLine, QuadReg, LogReg, ExpReg,
PowerReg, S-Gph1, S-Gph2, S-Gph3, Square, Cross, Dot, Scatter, xyLine, Hist,
MedBox, N-Dist, Linear, Med-Med, Quad, Log, Exp, Power, Y=Type, ParamType,
Y>Type, Y<Type, Y>Type, Y< Type, SortA(, SortD(, G]SelOn, G]SelOff, T]SelOn,
T]SelOff, DrawOn, DrawOff, List1, List2, List3, List4, List5, List6
Commands available with the Z key in the PRGM Mode
S-WindAuto, S-WindMan, G-Connect, G-Plot, VarRange, VarList1, VarList2, VarList3,
VarList4, VarList5, VarList6
Commands available with the ! key
StoV-Win, RclV-Win, Vertical, Horizontal
To Next Page
Loading...
Need help?
General
