Casio FX-95ES PLUS User Manual

3. In response to the prompts that appear, input the values you want to
use, pressing after each one.
For this prompt: Input this:
Start? Input the lower limit of X (Default = 1).
End?
Input the upper limit of X (Default =
5).
Note: Make sure that the End value is
always greater than the Start value.
Step?
Input the increment step (Default = 1).
Note: The Step specifies by how
much the Start value should be
sequentially incremented as the
numerical table is generated. If you
specify Start = 1 and Step = 1, X
sequentially will be assigned the
values 1, 2, 3, 4, and so on to
generate the numerical table until the
End value is reached.
• Inputting the Step value and pressing generates and displays the
numerical table in accordance with the parameters you specified.
• Pressing while the numerical table screen is displayed will return
to the function input screen in step 2.
Example: T
o generate a numerical table for the functions f(x) = x
2
+
1
2
for
the range -1 ≦ x ≦ 1, incremented in steps of 0.5 (MthIO-MathO)
fx-82ES PLUS/fx-85ES PLUS/fx-350ES PLUS:
(TABLE)
fx-95ES PLUS: (TABLE)
(X) 1 2
1 1 0 5
47

Casio FX-95ES PLUS Specifications

General

Model	FX-95ES PLUS
Category	Scientific Calculator
Digits	10+2 digits
Number of Functions	274
Memory	9 variables
Weight	95 g
Power Source	Solar and Battery
Key Type	Plastic
Battery Life	Approx. 3 years (based on 1 hour of use per day)