Program
WjBM
■
prime factor analysis
Definite integrals using Simpson’s rule
A«+Y transformation
Minimum loss matching
Cantilever under concentrated load
Normal distribution
Graph variation by parameters
Hysteresis loop
Regression curve
Parade diagram
<P riortouse>
• Always check the number of remaining steps before attempting to store
programs.
• The library is divided into two parts: a calculation section and a graph sec
tion. The calculation section shows only answers, while the graph section
shows whole displays.
• Press the S key whenever “ Graph” appears within a program (“ Graph Y
= ” indicated).
• If it is necessary to specify a calculation mode (e.g. BASE-N, SD1) in a pro
gram, be sure to specify it after pressing S ( 2] (WRT mode).
Then start programming by pressing S .
To Next Page
Loading...
