CIs
G- T Graph-text/Clear screen key
•Switches between the graph display and text display (see page 36).
• shift cls exe clears the graph display (“ done” is displayed),
■ Function keys
Press for functional calculation. Various uses are available in combination with
the shift key, and/or depending on the mode being used.
m Multistatement key
L xnor-l k
•Press to separate formulas or commands in programmed calculations or con
secutive calculations.
The result of such combinations is known as a multistaterrient (see page 53).
•Press following shift in the BASE-N mode to enter the logical operation for nega
tion of logical sums (xnor).
(eng) Engineering/Negation key
NotLxorJm
•Press to convert a calculation result to an exponential display whose exponent
is a multiple of three.
kilo mega giga milli micro nano pico
(103= k , 106= M , 109= G , 10-3= m, 1 0 6 = ¡x , 10"9= n , 10"12= p )
•When obtaining logical negation for a value in the BASE-N mode, press prior
to entering the value.
•Press following the shift key in the BASE-N mode to obtain the exclusive logical
sum.
Int
Square root/integer key
Dec
•Press prior to entering a numeric value to obtain the square root of that value.
•When pressed following the shift key, the integer portion of a value can be obtained.
•Press followed by exe in the BASE-N mode to specify the decimal calculation mode.
•When pressed following the shift key in the BASE-N mode, the subsequently
entered value is specified as a decimal value.
- 2 6 -
To Next Page
Loading...
