*As with the number of input steps (see page 35), the replay function can accept
input of up to 127 steps.
* The replay function is not cleared even when Q3 is pressed or when power is turned
off, so contents can be recalled even after Q3 is pressed.
Example
E E S G D Q G Q tl) ©
123X456_
56088.
123X456_
* Replay function is cleared when mode or operation is switched.
■ Error position display function
When an ERROR message appears, press B or (H) to display the calculation with
the cursor located at the step that caused the error. You can also clear an error
by pressing Q3 and then reenter the values and formulas from the beginning.
Example 14^0x2.3 mistakenly input instead of 14^10x2.3:
E B IX lH H C S D tlD Q C IK P l
R>l (or ® )
Ma ERROR
14-H3X2. 3
Cursor indicates where error is
generated
O ü K ü K T i
14-H[0]x£. 3
3. 22
- 5 2 -
To Next Page
Loading...
