— 3 —
MIDI messages receivable with GZ-50M
MIDI channel: 1 - 16 channel
Note On/Off: Note number 0 - 127
Velocity 1 - 127
Program change: 0 - 127 on channel 1 -9 & 11 - 16
0 - 7 on channel 10
Pitch bend: 00H/00H - 7FH/7FH
Control change: Modulation Control No. 1 0 - 127
Volume Control No. 7 0 - 127
Pan Control No. 10 0 (left) - 64 (center) - 127 (right)
Expression Control No. 11 0 - 127
Hold Control No. 64 0 - 63: Off, 64 - 127: On
Sostenuto Control No. 66 0 - 63: Off, 64 - 127: On
Soft Control No. 67 0 - 63: Off, 64 - 127: On
Effect depth Control No. 91 0 -127
All sounds off Control No. 120
Reset all controllers Control No. 121
* See next page for information about the initial settings.
Local control On/Off Control No. 122 0: Off, 127: On
All notes off Control No. 123
Registered Parameter Number (RPN) Control No. 36: LSB, No.37: MSB
Pitch bend sense Control No. 100 00H
Control No. 101 00H
Data entry Control No. 6 00H - 0CH
Control No. 36 00H
Fine tuning Control No. 100 01H
Control No. 101 00H (20H: -50 cents)
Data entry Control No. 6 20H - 40H - 60H (40H: center)
Control No. 36 00H (60H: +50 cents)
Coarse tuning Control No. 100 02H
Control No. 101 00H (34H: -12 seminotes)
Data entry Control No. 6 34H - 40H - 4CH (40H: center)
Control No. 36 00H (4CH: +12 seminotes)
RPN null Control No. 100 7FH
Control No. 101 7FH
Active sensing:
Channel pressure: Reconized as modulation
System exclusive: Effect change [F0][44][0B][09][xx][F7]
[xx]: [00] - [09], [0F]
[00]: Reverb1 (Stage)
[01]: Reverb2 (Hall)
[02]: Reverb3 (Room)
[03]: Chorus
[04]: Tremolo
[05]: Phase shifter
[06]: Organ speaker
[07]: Enhance
[08]: Flanger
[09]: EQ Loundness
[0F]: Effect OFF
GM system on [F0][7E][7F][09][01][F7]
* See next page for information about the initial settings in The General MIDI system.
To Next Page
Loading...
Need help?
General
