Example:
@0 ] C L E A R S S c l e a r s a s i n g l e pr o g r a m
tel[£) CLEAR A Qi clears all programs
5-6-17 Option Specifications
■ Cassette Magnetic Tape
In order to record programs or data stored in this unit on a cassette tape, use the FA-3
cassette interface and an ordinary tape recorder. If the tape recorder has a remote
terminal, remote control can be conveniently performed from the PB-100 through the
FA-3.
For tape recorder connection procedures and detailed operating procedures, refer to the
FA-3 operation manual.
• Program recording
Format: SAVE ["filename"] (Item in brackets may be omitted.)
The filename may be composed using 8 characters or less enclosed by quotation marks
and may contain alphabetical letters/numbers/symbols.
Example:
•NO.r
This command starts the tape recorder in the RECORD position.
Operation: SAVE ("filename") BS
A SAVE command can only be used manually.
• Program callout
Format: LOAD ["filename") (Item in brackets may be omitted.)
This command starts the tape recorder in the PLAYBACK position.
Operation: LOAD ["filename") SB
Display during program load
pf:abc
Program file filename
Even if a program has already been written in the designated program area prior to
callout, the former program will be erased starting with the initial line number of the
program to be loaded and the new load will be made correctly.
-58-
To Next Page
Loading...