— 6 —
2) Turn on the power switch of each machine.
3) The slave machine must be set the date of Feb. 3rd, 1901 into the memory under the calculator mode.
Operation: 1. Press
2. Select "CAL" mode or press 6.
3.
If you don't set the date, the "PASSWORD" isn't transferred to the slave machine.
4. DATA TRANSFER
SF-4400/SF-4600B can transfer customers data to other SF-4400/SF4600B with memory protection
only when replacing the LCD or the outer case. How to transfer the data.
* Before connecting the cable (SB-60/62), be sure to reset the slave machine to clear all data.
1) Turn off the power switch and connect the two units using the cable (SB-60/62) as shown in the
drawing.
SB-60/62 accessory cable
ON
MENU
TIME TIME TIME M+
DATE DATE DATE R
123
M SUN
1901/ 2/ 3
To Next Page
Loading...
Need help?
General
