Casio TONE BANK CT-670 - Page 12

8.
Performance
Memory
Function
ey
Pe
be
A
NE
LT
AER
I
RTE
OE
STE
EN
EE
RN
a
EA
EN
AEN
LES
TITIES
HIRT
TT
REY
+ Notes on recording
e You can record changes in the following operations as well as keyboard play
during recording.
Changing preset tones.
Changing auto-rhythms.
Starting or stopping a rhythm ack:
Starting a rhythm track using an INTRO pattern.
Inserting the FILL-IN patterns of rhythms.
Ending the rhythm track with an ENDING pattern.
e Memory capacity is approximately 1,250 notes. Operations such as changes
in rhythms and tones are counted as a half-note.
e Recording automatically ends when you exceed the memory capacity.
= Playing back memory contents
(1) Press the recording START/STOP button to play back your performance. The
light above the RECORD button lights and playback starts.
(@) Press the recording START/STOP button again to stop playback.
+ Notes on playback
_ © You can play the entire keyboard with the playback if the recording was done
in the Casio Chord OFF mode. If you recorded in the Casio Chord ON or
FINGERED mode, only the melody keyboard can be used.
e All switches and buttons except voume sliders are inoperative during
playback.
Da
MIDI Functions
e
Refer
to
the
general
guide
found
on
page
4-5
for
exact
locations
of
this
keyboard
controls
and
‘connections.
.
m What is MIDI?
“MIDI” stands for “Musical Instrument t Digital Interface”. Practically peke
it
lets
you
connect
this
keyboard
to
other
MIDI-equipped
musical
instruments
and
devices,
such
as
synthesizers,
drum
machines,
sequencers,
and
even
personal computers.
@ MIDI terminal functions
MIDI IN ..... Receives external MIDI messages.
MIDI OUT ...Sends MIDI messages to external devices.
MIDI
THRU
.
.Receives
external
MIDI
messages
through
MIDI
IN
and
outputs
| them without modification.
ΠCT-670 MIDI settings
+ Setting the MIDI mode
_ The CT-670 features 2 different MIDI modes. |
MODE A: Single channel MIDI mode :
Whenever you set the POWER/CHORD/MIDI selector to MIDI, this unit is
set to MIDI MODE A automatically. In this mode, the CT-670 sends/receives
MIDI data using channel 1 only.
MODE B: Multi-timbral mode
The CT-670 is designed for simultaneous receipt of 4 MIDI channels (channel
1 through 4). Channel 1 through 3 can be assigned their own keyboard voices,
while channel 4 is used as either the fourth voice or rhythm channel.
=.