— 3 —
VR301 : Tint adjustment
VR300 : Contrast adjustment
VR700 : VCO free run frequency adjustment
VR100 : VCC2 adjustment
T200 : LLD Coil adjustment
ADJUSTMENT
Top View
Bottom View
1. VCC2 adjustment, VCC7, VEE1 voltage check
2. LLD coil adjustment
3. Free running frequency adjustment
4. Contrast adjustment
5. TINT pot adjustment
Preparations
1. Connect AVB (CP725) to GND.
2. Set SW100 on UHF mode.
Adjustment And Test Point Locations
To Next Page
Loading...
