What to do if my Caso VC 6 is not creating a complete vacuum in the bag?
If a complete vacuum isn't being created in the bag with your Caso Vacuum Cleaner, ensure the open end of the bag is completely inside the vacuum chamber and positioned correctly. Also, the bag may be defective, so try selecting another one. Check the welding and normal seals for dirt; if present, clean the seals and retry once they are dry.
Why does my Caso VC 6 Vacuum Cleaner bag not hold the vacuum after sealing?
If the bag doesn't hold the vacuum after being welded shut by your Caso Vacuum Cleaner, the bag may be defective; select another bag and wrap paper serviettes around any sharp edges on the content. Alternatively, leaks along the welding seam may be caused by creases, crumbs, grease, or liquids. Open the bag again, clean the upper internal part, and remove any foreign matter from the sealing bar before re-welding.
Why is my Caso VC 6 not working?
If your Caso Vacuum Cleaner isn't functioning, first ensure the power plug is properly plugged into the mains. If it is, check if the electrical socket is defective by selecting another one. If the issue persists, the power cable or plug might be defective, requiring you to send the device to Customer Service.
How to fix bag welding issues with my Caso VC 6?
If the bag is not being welded correctly by your Caso Vacuum Cleaner, the sealing bar may be overheating, causing the bag to melt. Open the cover on the unit and let it cool down for a few minutes.
General| Brand | Caso |
|---|---|
| Model | VC 6 |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
