Need help?Do you have a question about the Cassese CS 88 and is the answer not in the manual?
General| Type | Pneumatic Underpinner |
|---|---|
| Category | Power Tool |
| V-Nail Sizes | 5, 7, 10, 12, 15 mm |
| V-nail size range | 5-15mm |
| Joinable Wood Height | Up to 80 mm |
| Safety | Safety guard, two-hand operation |
| Operation | Pneumatic foot pedal |
| Usage | Framing, Joinery |
| Air Pressure | 6-8 bar (87-116 PSI) |
Lists all accessories included with the machine, such as wrenches, hammers, and triangles.
Details crucial machine parameters including width, height, size, weight, and energy needs.
Presents optional accessories and parts available for purchase to enhance machine functionality.
Specifies the one-year warranty coverage for parts and labor against manufacturing defects.
Provides instructions for reassembling the machine after it has been transported or stored.
Explains how to correctly position and use the two self-adjusting backfences for accurate work.
Guides users on how to choose the optimal stapling points based on moulding width and thickness.
Explains that joining is performed using metal wedges, a Cassese invention for tight corners.
Provides a step-by-step guide for inserting and setting up the wedge cartridge in the distributor.
Recommends periodic lubrication of the hammer and wedge distributor for optimal performance.
Offers a procedure to safely remove a wedge that has become lodged in the distributor.
To Next Page
