Need help?Do you have a question about the Cassese CS 79 and is the answer not in the manual?
General| Operation | Pneumatic |
|---|---|
| V-Nail Sizes | 5, 7, 10, 12, 15 mm |
| V-Nail Size Range | 5-15 mm |
| Operating Pressure | 6 bars |
| Category | Pneumatic Underpinner |
Details on accessories supplied with the CS 79 frame joining machine.
Key technical data and dimensions for the CS 79 frame joining machine.
List of optional accessories available for purchase for the CS 79.
Information regarding the warranty and guarantee terms for the CS 79.
Step-by-step guide for unpacking and reassembling the CS 79 machine.
How to select and set the stapling positions on the CS 79 machine.
Procedure for setting and storing the desired stapling positions.
Guidance on selecting the appropriate top presser end for mouldings.
How to adjust the assembly angle of the CS 79 for precise frame joining.
Explanation of the assembly process using metal wedges for frame joining.
Instructions for loading and changing wedge cartridges on the CS 79.
Detailed steps for joining mouldings and creating frames with the CS 79.
Recommendations for periodic lubrication of CS 79 machine parts.
Troubleshooting steps for clearing wedges stuck in the wedge distributor.
Procedure for resolving hammer and wedge jamming issues in the CS 79.
Guide on how to replace the battery for the wedge-fully-inserted indicator.
To Next Page
