To Next PageTo Next Page
Need help?Do you have a question about the Castelgarden XK4 160 HD and is the answer not in the manual?
Explains symbols used on the machine to remind users of care and attention required.
Explains how figures and headings are numbered and referenced within the instructions.
Details the rear-wheel drive, hydrostatic transmission, and front-mounted tool drive for the machine.
Explains the three positions of the clutch-parking brake pedal and risks of misuse.
Describes how the driving-service brake pedal controls speed and braking, and its emergency use.
Describes the four positions of the ignition lock and risks associated with leaving the key in.
Details the clutch release levers for disengaging transmission and warnings about misuse.
Explains how to open the engine casing for access and the safety requirement for it to be closed.
Explains the quick connections for easy shifting and replacement of implements.
Lists tasks and corresponding genuine GGP accessories for mowing, snow clearance, grass clipping, sweeping, and weeding.
Instructions for filling the petrol tank, including safety warnings and fuel type recommendations.
Procedure for checking engine oil level, including frequency, procedure, and consequences of incorrect levels.
Details general and electrical safety checks required before operation.
Step-by-step instructions for starting the engine, including checks and throttle/choke usage.
Provides tips for operating the machine, including oil checks, slope driving, steering, and keeping hands away from moving parts.
Details the schedule and procedure for changing engine oil, including oil type and quantity.
Outlines the schedule for checking and changing transmission oil for 4WD models, specifying oil types.
Specifies the correct tyre pressure for the front and rear tyres.
Details procedures for draining and filling transmission oil, including critical warnings.
Details the checks and adjustments required for the steering system at specific intervals.
Information about the battery, including safety precautions for acid contact and charging requirements.
Covers battery charging methods, removal/installation, and terminal cleaning.
Details the cleaning and replacement schedule for the engine's air filter, with specific warnings.
Specifies the replacement interval for the spark plug and its type and electrode distance.
Provides a table of lubrication points, actions, and frequency (every 50 hours or after each wash).
Mentions checking/replacing the fuse for electrical faults.
General| Engine Power | 8.4 kW |
|---|---|
| Cutting Width | 102 cm |
| Cutting Height Adjustment | Centralized |
| Weight | 232 kg |
| Engine Type | Petrol |
