Need help?Do you have a question about the Castelgarden XM130 and is the answer not in the manual?
General| Brand | Castelgarden |
|---|---|
| Model | XM130 |
| Category | Lawn Mower |
| Language | English |
Explains symbols used on the machine and their meanings for safe operation.
Lists components included with the machine for assembly. See Fig. 1.
Instructions for opening and closing the engine casing for maintenance access.
Information and procedures related to the machine's battery.
Details on installing and adjusting the seat, including torque specifications.
Instructions for installing the steering wheel, including shim washer usage.
Explains the three positions of the combined service brake and clutch pedal.
Describes the three positions of the clutch-parking brake pedal for HD models.
Operation of the hydrostatic drive and service brake pedal.
Specifies approved cutting deck models for different machine series.
Step-by-step guide for safely filling the fuel tank with unleaded petrol.
Instructions for checking the engine oil level before each use.
Details the machine's safety system and required checks before operation.
Comprehensive steps for starting the engine, including choke and throttle settings.
Procedures for stopping the engine safely, including cooling down and fuel shut-off.
Detailed steps for changing the engine oil, including quantity and frequency.
Maintenance schedule for the engine's pre-filter and paper filter.
Information on battery maintenance, charging methods, and installation/removal.
Method for charging the battery using the machine's generator.
Guidance on using a battery charger, specifying constant voltage type.
Details lubrication points on the chassis, including grease nipples and oil application.
Angiver klippeaggregatets kompatibilitet med forskellige frontklipper-modeller.
Detaljerer justering af klippehøjde, hældning og ophæng.
Anbefalinger til justering af klippehøjden for bedste klipperesultat.
Forklarer effekten af aggregatets hældning på klipperesultatet.
Generelle forberedelser og sikkerhedsforanstaltninger før vedligeholdelse.
Detaljerede trin for at placere aggregatet i serviceposition.
Safety precautions and procedures for blade replacement and synchronization.
Important safety precautions when working with blades.
Step-by-step guide for replacing blades, including torque requirements.
States cutting deck compatibility with different front mower models.
Details cutting height adjustment, incline, and mounting of the deck.
Recommendations for adjusting cutting height to achieve the best cutting results.
Explains the effect of the deck's incline on cutting performance.
General preparations and safety precautions before performing maintenance.
Detailed steps for placing the deck in a service position.
Safety precautions and procedures for blade replacement and synchronization.
Important safety precautions when working with blades.
Step-by-step guide for replacing blades, including torque requirements.
To Next Page