Do you have a question about the Castell KS20-FSS-P-C/O4 and is the answer not in the manual?
Details the back-on-panel mount operation of the KS20 powersafe electrical switch for machine isolation.
Clarifies the KS key switch is for safety systems, not security purposes, and notes no hazardous substances are used.
Covers mounting procedures for front/back units and wiring connections, including earthing.
Highlights essential installation aspects like anti-tamper fasteners and qualified personnel.
Outlines periodic visual checks and specific lubrication advice using dry powder graphite.
Provides guidance on handling detected defects and contacting the support department.
Explains the KS switch's role in machine guarding, often with access interlocks for safety.
States compliance with essential health and safety requirements for the components.
Illustrates the physical dimensions for the KS20 Front of Board (enclosure) mounting.
Illustrates the physical dimensions for the KS20 Back of Board mounting.
Shows the wiring diagram for the switch state when the key is free and the switch is off.
Illustrates the wiring for a 2 Normally Open/2 Normally Closed contact arrangement.
Details the Flip Cap accessory and its corresponding part number.
Provides contact information for Castell Safety International in the UK, Germany, USA, and China.