What does 'Instrument configured' mean on Castellini Medical Equipment?
If the Castellini Medical Equipment displays 'Instrument configured', it means the instrument in the indicated position on the board has been automatically configured with the factory settings. If the message appears again, call technical support.
What to do if Castellini Medical Equipment shows H2O2 level low?
If the Castellini Medical Equipment displays 'H2O2 level low, fill tank', it means the hydrogen peroxide level in the tank is too low. You should fill the hydrogen peroxide tank.
What to do if Castellini Medical Equipment displays 'Put instruments back in place'?
If your Castellini Medical Equipment shows 'Put instruments back in place', it means the system detected an instrument was already withdrawn when the disinfecting cycle was being set. Ensure all instruments are correctly placed, then restart the cycle. If the error persists, contact technical support.
How to fix 'Open H2O spray cocks' error on Castellini Medical Equipment?
If the Castellini Medical Equipment displays 'Open H2O spray cocks', it means the system can't fill the lines with hydrogen peroxide during the disinfecting cycle. Open the water spray cocks and repeat the disinfecting cycle. If the message persists, contact technical support.
What does 'Check suction tubes, repeat cycle' mean on Castellini Medical Equipment?
If the Castellini Medical Equipment displays 'Check suction tubes, repeat cycle', it means the suction tubes aren't connected properly during the flushing or disinfecting cycle. Ensure the suction tubes are correctly connected and repeat the disinfecting or flushing cycle. If the message persists, contact technical support.
What to do if Castellini Medical Equipment displays 'Seat emergency device activated'?
If the Castellini Medical Equipment displays 'Seat emergency device activated', it means the dental chair encountered an obstacle. Press the "seat up" button and clear the obstacle.
How to resolve 'Backrest emergency device activated' on Castellini Medical Equipment?
If the Castellini Medical Equipment displays 'Backrest emergency device activated', it means the dental chair backrest encountered an obstacle. Press the "seat up" button and clear the obstacle.
Why does Castellini Medical Equipment show 'Move bowl'?
If the Castellini Medical Equipment displays 'Move bowl', it means the dental chair is blocked by the bowl. Move the bowl so it is no longer obstructing the dental chair.
Why does my Castellini Medical Equipment say 'Turn on M.W.B.'?
If the Castellini Medical Equipment displays 'Turn on M.W.B.', it means the system is attempting a task that requires the M.W.B. system to be on. Turn on the M.W.B. system.
How to fix 'Withdraw at least one instrument' error on Castellini Medical Equipment?
If the Castellini Medical Equipment displays 'Withdraw at least one instrument', it means you tried to start a disinfecting cycle without selecting any instruments or the cup. Repeat the disinfecting cycle, selecting at least one instrument or the cup. If the message persists, contact technical support.
Describes the purpose and classification of the dental units.
Details medical device and electrical equipment classifications and applicable standards.
Lists general safety precautions and warnings for operating the dental unit.
Explains the procedures and recommended products for cleaning and disinfecting the equipment.
Describes the various safety devices incorporated into the dental chairs.
Explains the emergency devices and how to use them to block equipment movement.
Introduces the touchscreen console for the dentist's control.
Explains the structure and navigation of the user interface menu.
Outlines the various general settings accessible through the menu.
Details how to configure the AUTOSTERIL disinfection cycle settings.
Explains how to set up the TIME FLUSHING automatic cycle for instrument ducts.
Covers the adjustment and configuration of the foot control.
Explains how to set the alarm threshold for the LAEC electronic apex locator.
Explains how to manage dental images from local memory or USB.
Describes the parts and operation of the multifunction foot control.
Explains the parts and operation of the push-pedal foot control.
Details the parts and operation of the power pedal foot control.
Covers the parts and operation of the lateral excursion foot control.
Explains the operation, warnings, and battery status of the wireless foot control.
Describes the characteristics and settings of the RESTORATIVE operating mode.
Details the characteristics and functions of the ENDODONTIC operating mode.
Describes the characteristics and settings for the IMPLANT operating mode.
Details the characteristics and settings of the RECIPROCATING operating mode.
Details the usage instructions for the SURGISON 2 surgical detartarer.
Explains the BOOST functioning mode and modulation settings for the scaler.
Provides important warnings and precautions for using the intraoral camera system.
Details how to set and execute the AUTOSTERIL automatic disinfection cycle.
Comprehensive list of potential fault messages, their causes, and recommended remedies for system errors.
Details the daily maintenance tasks to be completed at the end of the workday.
General| Brand | Castellini |
|---|---|
| Model | SKEMA 6 Series |
| Category | Dental equipment |
| Language | English |
To Next Page
