CAT C32 - 4.6.1. Controls; 4.6.2. Digital (LCD) Indication

Technical CATERPILLAR – 1000 kVA Page 24
Description UTILITY POWER MODULE
Revision 1.0 1 May 2006
4.6. EMCP 3.3 Standard features
4.6.1. Controls
• Auto/Start/Stop
• Engine Cool-Down Timer
• Emergency Stop
• Engine Cycle Cranking
• Lamp Test
• Generator Voltage (w/CDVR)
• Engine Speed/Generator Frequency (Electronic Engines Only)
4.6.2. Digital (LCD) Indication
• Generator AC Voltage – 3 phase (L-L and L-N)
• Generator AC Current (per phase and average)
• Generator Power (kW) (total and per phase)
• Generator kVAR (total and per phase)
• Generator kVAR-hr (total)
• Generator % of rated (total)
• Generator kVA (total and per phase)
• Generator kW-hr (total)
• Generator Power Factor (PF) (average and per phase)
• Generator Frequency
• Engine RPM
• Battery Voltage
• Engine Hours
• Engine Successful Start Counter
• Engine Oil Temperature
• Engine Oil Pressure
• Engine Coolant Temperature
• Engine Crank Attempt Counter
• Service Maintenance Interval (EngDays)
• Real Time Clock
• Twenty (20) Event Fault Log
• Air Filter Differential Pressure
• Boost Pressure
• Engine Crankcase Pressure
• Engine Operating Hours or Calendar
• Engine Exhaust Temperature (L & R)
• Fuel Filter Differential Pressure
• Fuel Pressure
• Engine Intake Manifold Temperature
• Oil Filter Differential Pressure
• Oil Temperature
• Fuel Consumption (US/Imperial gal/hr or Liters/hr)
• Total Fuel Consumed