CAT C32 - Page 36

Technical CATERPILLAR – 1000 kVA Page 36
Description UTILITY POWER MODULE
Revision 1.0 1 May 2006
FACTORY INSTALLED STANDARD EQUIPMENT (Continued)
Feature Benefits
Electrical
SHORE POWER CONNECTION
Connections
The module is provided with shore power connection for lighting, generator
space heater, and battery charger. The control system provides a 20 Amp internal
transfer switch that automatically transfers internal loads to the genset for
autonomous operation.
POWER OUTPUT CONNECTION
The electrical power output connections are provided through a convenient
door on the right hand side of the module. The paralleling circuit breaker is rated for
65 kA interrupt capability. The module features robust well braced busbars
with easy customer access. These busbars are three phase plus full rated neutral.
They include IEC standard hole pattern, fully rated for 0.8 power factor.
AVAILABLE OPTIONAL CONTROL EQUIPMENT
Featur
e
Benefit
s
Remote Softwar
e
Provides modem and software for off-site monitoring of installations
C32 EAME power modules installations can be accessed via telephone connection.
Operator can contact local installation from remote via telephone line,
and monitor it as if in front of the local control panel.
Depending on a password, operator has access to control functions.
Local communications, via Internet Explorer located on customer PC, provided to
interface with touchscreen. Server software and Windows compatible touchscreen
provided.
Site Controller Includes industrial PC and site software for EAME modules.
Local communications, via internet Explorer located on PC, with touchscreen.
Server software and Windows compatible
This option is browser based with ability to view 1 to 18 individual units with Internet
Explorer. From the customer PC you can launch a browser and look at each
individual unit with same views displayed at each local unit.
Plant controller includes overview screen.