1616
SAFETY RULES FOR LIFT TRUCK OPERATORS
Always be aware of floor capacity!
Make sure the floor will support the weight of
the loaded lift truck.
101027
Stay under the overhead guard!
DO NOT hold on to the overhead guard.
101526
Be careful of forks that extend beyond the
load!
If the forks extend beyond the load, use extra
caution. Make sure the fork tips do not contact
other material.
101036
Avoid off-center loading!
Set the forks as far apart as possible for maxi-
mum support of the pallet or load. Too small a
fork spread can cause instability of the load.
103444
Check fork stoppers for engagement!
If the fork stoppers are not properly engaged,
the forks may shift and cause off-centered or
unstable loads.
Check work areas for high risk!
When working on docks, ramps, platforms and
other high risk areas, use adequate blocks to
reduce the risk of the lift truck from falling off.
102146A
101035
20%
20%
60%
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
To Next Page
Loading...