1717
SAFETY RULES FOR LIFT TRUCK OPERATORS
Position controls correctly for starting!
Make sure the direction lever is in the NEU-
TRAL position, the lock knob is in the NEU-
TRAL position and the parking brake lever is
set properly.
102518
Be aware of the stability of an empty lift
truck!
An empty lift truck will tip over more easily
than a loaded one in a lowered position.
100662
DO NOT allow any riders!
DO NOT allow anyone to ride on the forks or
on any other part of the lift truck—at any time.
If you cannot see where you are going, DO
NOT MOVE!
Travel slowly around corners. Sound the horn
at cross aisles and other areas where you can-
not see clearly or where visibility is restricted.
101015
100626
Stay away from slippery surfaces!
– Loose or slippery materials such as sand,
gravel, ice, mud, etc., on your operating
surfaces could cause a skid or tipover.
Avoid these conditions or slow down.
– Keep your operating surfaces clean and dry
at all times. Wet spots could cause a skid or
tipover.
– You need greater stopping distance on wet
surfaces. Apply brakes earlier on slippery
surfaces than on dry surfaces.
– Do not drive into a flooded area whenever
possible.
100998
◆◆
Operating Precautions
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
To Next Page
Loading...