8585
TROUBLESHOOTING
101203A
① Extension valve ③ Inner wheel nut
② Outer wheel nut
1. Remove the outer tire extension valve by
turning it counterclockwise.
2. Loosen the outer wheel nuts about two
turns.
NOTICE: DO NOT remove the wheel
nuts. ONLY loosen them.
3. Position the jack under the truck at the
specified jacking point.
4. Raise the truck by operating the jack until
the tire just clears the ground.
5. Remove the outer wheel nuts by hand.
6. Firmly grip the tire with both hands, and
remove it from the truck.
• Dual Tire
When removing the outer wheel nuts,
grasp each nut properly to prevent the
wrench from slipping off the nut.
When removing the wheel, be careful not
to strip the inner wheel nut threads on the
edges of the bolt holes in the rim.
To Remove Outer Tire
CAUTION
!
WARNING
!
To Next Page
Loading...