EasyManua.ls Logo

Cata CMD 9208 BK - Preparation for First Use; Initial Cleaning; Switching on for the first time

Cata CMD 9208 BK
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HU-27
CAUTION!
Pour some water into the dripping pan and place it on the first level so as to collect the cooking fats.
PREPARING FOR FIRST USE
CAUTION!
Refer to the chapters on safety.
Initial cleaning
Take the accessories and removable shelf supports out of the appliance.
Clean the appliance before using it for the first time. Place the accessories and removable shelf supports
in their initial position
Switching on for the first time
Take the accessories and removable shelf supports out of the appliance.
Clean the appliance before using it for the first time. Place the accessories and removable shelf supports
in their initial position
Preheat the appliance with nothing inside it in order to burn off fat residues.
1. Set the function and the maximum temperature.
2. Leave the appliance in operation for one hour.
3. Set the function and the maximum temperature.
4. Leave the appliance in operation for 15 minutes.
5. Set the function and the maximum temperature.
6. Leave the appliance in operation for 15 minutes.
HOOK POSITIONING AT THE REAR HOOK POSITIONING AT THE FRONT
Fig. b
7. The accessories may get hotter than usual.
8. The oven can produce an unpleasant odour and smoke.
9. This is not a malfunction.
10. Make sure the airflow inside the room is adequate.
EN-10

Related product manuals