How to fix Cata hob that won't turn on?
If your Cata hob isn't turning on, first ensure it's properly connected to the power supply and switched on. Then, check for any power outages in your home or area. If the problem continues, it's best to call a qualified technician.
Why are the touch keys on my Cata hob unresponsive?
If the touch keys on your Cata hob aren't responding, it's likely that they are locked. To resolve this, unlock the keys. For detailed instructions on how to do this, refer to the ‘Using your induction hob’ section.
What to do if cookware isn’t becoming hot on Cata hob?
If your Cata hob's cookware isn’t heating up and the symbol has appeared on the display, it could be due to a couple of reasons. Either the cookware isn't suitable for induction cooking, or it's too small for the cooking zone or not properly centered. To fix this, use cookware designed for induction cooking and ensure it's appropriately sized and centered on the cooking zone. See section ‘Choosing the right cookware’ for more details.
What does ER03 mean on my Cata hob?
If you see 'ER03' on your Cata hob, it means water or cookware is over the control area. Simply clean the user interface to resolve this issue.
Why are the touch keys on my Cata INSB 6032 BK difficult to operate?
If the touch keys on your Cata hob are hard to use, it might be because there's a bit of water on them, or you're using just the tip of your finger. Make sure the key area is dry, and use the pad of your finger to touch the keys.
What does E3E mean on Cata hob?
If your Cata hob is showing 'E3E', it indicates an abnormally high supply voltage. Inspect whether the power supply is normal, and power on after it returns to normal.
What does E4E mean on Cata hob?
If your Cata hob is showing 'E4E', it indicates an abnormally low supply voltage. Inspect whether the power supply is normal, and power on after it returns to normal.
What does E1E mean on Cata hob display?
If your Cata hob is displaying 'E1E', it means the ceramic glass plate sensor is reading a temperature that is too high. Please restart the hob after it cools down.
What does E2E mean on my Cata INSB 6032 BK Hob?
If your Cata hob is displaying 'E2E', it means the IGBT temperature sensor is reading a temperature that is too high. Please restart the hob after it cools down.
What does E5E mean on Cata INSB 6032 BK Hob display?
If your Cata hob is displaying 'E5E', it means there is a temperature sensor failure. The connection cable is not correctly plugged in or is defective.
To Next Page
General
