To Next PageTo Next Page
Need help?Do you have a question about the Cata LHV-190 and is the answer not in the manual?
Ensure power is disconnected before installation and follow electrical safety guidelines.
Avoid unsuitable locations, ensure proper ventilation, and follow mounting height requirements.
Supervise children and note manufacturer liability for improper use or failure to follow instructions.
Verify propeller condition, free rotation, and absence of foreign bodies before installation.
Install the appliance following the provided graphic documentation.
Ensure power supply voltage and frequency match the appliance's nameplate specifications.
Use a double pole switch with a minimum 3mm contact separation for wiring.
Class I appliances require an efficient ground connection for safety.
Connect the fan permanently to a fixed duct using appropriate wiring and section.
Position the power cable to prevent liquid entry; seal entry if necessary for IP rating.
It is recommended to disconnect the appliance from mains when not in use.
Verify all connections are correct and cables are properly placed for safe operation.
Disconnect from power before cleaning and prevent accidental reconnection.
Clean the appliance regularly with a damp cloth.
Inspect motor, propeller, and components periodically for dirt or damage.
Remove dirt from propeller and casing to prevent imbalances and maintain performance.
Always use original spare parts for repairs and note manufacturer's right to modify.
General
